Molex 10m Cat6a Networking Cable Black PCD-07009-BK

The Molex PowerCat 6A shielded patch cords are key components of the PowerCat 6A shielded end-to-end solution. Molex PowerCat 6A Patch Cords are designed to support high speed 10GBASE-T networks and are backward compatible with 10/100/1000BASE-T networks. The patch cable is made from high quality four pair 26 AWG stranded copper wire. Available in a range of colors and lengths, PowerCat 6A patch cords are pre-terminated with RJ45 plugs and feature anti-snag slim strain relief slip on boots.

• Conductor:4-pair 26 AWG stranded copper wire
• Cable Type:Slim profile
• Boot Type:Clear anti-snag slip-on boots
• Connectors:Pre-terminated with RJ45 plugs
• Wiring Standard:Suitable for EIA 568A or EIA 568B
• Sheath Type:LS0H (Low Smoke Zero Halogen)
• Performance:10G performance when installed as a complete PowerCat 6A system

Specifications:

Standards Compliance:ISO/IEC 11801 2nd Edition and Amendment 1 Class EA; TIA-568.2-D Category 6A; UL 1863; CSA C22.2

Fire Propagation Tests:IEC 60332-1-1; IEC 61034-2

Conductor Size:26 AWG stranded copper wire

Screen Material:Aluminium/polyester shield with tinned copper drain wire

Nominal Outer Diameter:6.5 mm

Sheath:Low Smoke Zero Halogen (LS0H)

Bend Radius:8 x O.D.

Operating Temperature:-25C to +55C

PoE Warranty Note:For new installations of PoE Type 3 / Class 5 and above to qualify for the Molex 25-year Application Assurance Warranty, Category 6A cable must be used throughout. Design eligibility must be verified using the Molex PoE Calculator.

Installation Recommendation:PoE on individual switch ports should be power-disabled before unplugging the associated powered device.

System Recommendation:Use the full range of PowerCat 6A products to maximise cabling and PoE performance.

Plug Minimum Operating Life:750 insertion cycles

RJ45 Plug Material:Clear polycarbonate (PC)

Boot Material:Clear polycarbonate (PC)

Contact Plating:1.27 m gold

RJ45 Plug Compliance:ISO/IEC 60603-7 and FCC 47 Part 68

Maximum Voltage:150 VAC

Maximum Current:1.5A @ 25C

PoE Support:Suitable for IEEE 802.3bt Type 1 to Type 4, Cisco UPoE+, HDBaseT PoH up to 100W

RP3 Compliance:EN 50174-2:2018; ISO/IEC 14763-2:2019; AS/NZS standards

What’s in the box:

• Molex 10m Cat6a Networking Cable Black